First of all, the edge banding used in soft forming edge banding should have a certain degree of ductility, and the thickness should be maintained at 0.6-0.8mm. The surface of the edge banding is matte.
Processed wood board types: particle board, multilayer board, density compression board (MDF),
Soft forming edge banding shape: J type/C type/semi-through J type/semi-circular type/water drop type/lightning type/horn type, etc.
Soft forming edge banding process refers to heating the edge banding to the specified temperature and then fitting the edge banding to the edge of the board through a mold.
At the same time, there is a certain controversy about whether the 45-degree bevel shape belongs to the soft forming process, which has been controversial in recent years! There are currently two processing techniques for 45-degree bevel shapes: 1. The edge banding is grooved before gluing, and then bonded by pressing the mold. The edge banding is not heated and softened during the entire processing process, so in this case many people think it does not belong to the soft forming edge banding process. 2. Use 0.6mm thick edge banding, heat and soften the edge banding and then bond it through the mold, so in this case many people think it belongs to the soft forming edge banding process. At present, with the development of technology, the high-end brand Reilband under Haochuan Machinery has launched a fully automatic multi-functional soft forming edge banding machine! This machine can process all the shapes mentioned above, and it only takes 1.2 seconds to switch the processing mode.

https://www.youtube.com/watch?v=EUnxIu97CYs&t=10s