1. Guide rail. Before installation, check whether the guide rail is flat. Both ends of the guide rail should be flush and quenched.

2. Machining If the parts processed by outsourcing are not processed according to the drawings, they will be returned, and the outsourcing manufacturer will be responsible for certain losses. For parts processed in the factory, if they are not processed according to the drawings, the person in charge of installation has the right to return them and reprocess them. For items that cannot be reprocessed, the party concerned shall compensate all material and labor costs.

3. Bearings: The glue pot part and the pulley part will all use imported skf bearings. Be careful not to mix them up. The installation of the bearings must follow the installation process.

4. When installing the conveyor belt motor, do not hit it hard! Otherwise, the device inside the reducer will be damaged.

5. The chain, whether it is a transmission chain or a conveyor chain, should not be too tight or too loose.

Key points for edge banding machine manufacturers to maintain their edge banding machines

1: It is necessary to perform regular maintenance on the edge banding machine. Usually the maintenance cycle of the edge banding machine is between 17 and 20 days. During the maintenance process, pay attention to check the wear of gears, bearings, eccentric bodies and other parts. For each part of the machine Make real adjustments.

2: After the edge banding machine stops working, it is necessary to clean it to remove impurities during the production process. At the same time, it is necessary to check whether all parts are intact and whether screws and the like are tightened. Records should be kept after cleaning.

Three: To ensure the normal operation of the lubrication system, the lubricating oil must be replaced regularly to lubricate relevant parts. The selection of lubricating oil must be suitable for the nature of the machine. Wrong use will have a certain impact on the operation of the machine.

Edge banding machine manufacturers must do a good job in maintaining and maintaining the edge banding machine during use to extend its service life as much as possible. Similarly, edge banding machine manufacturers cannot do without proper maintenance. Only in this way can the edge banding machine be properly maintained. Edge machines create greater value.