There are many factors that affect the edge-sealing quality of edge-banding machines, such as interruption of edge-banding work, interference with time measurement, and impact on the reliability of working hours application. To improve work rate, operating efficiency and improve quality, there are generally several methods:

1. If the partial edge banding strip cannot be firmly bonded to the edge of the board, it can be repaired with glue. If necessary, tear off, saw or mill off the edge banding strip and re-seal it.

2. When rust spots are found on the panels, wipe the machine with anti-rust oil in time.

3. Regularly maintain the edge banding machine equipment, especially the gluing device of the edge banding machine.

4. The cooperation between the process flow and the working procedures (such as drilling the panels first or sealing the door strips in groups, etc.) must be clear and clear. If the cooperation is not good, problems will occur.
produce adverse effects;

5. The performance of the edge banding machine (such as crawler speed), the orientation and height of the workpiece placement, the worker's operating speed and ability to judge and handle faults, and the worker's cooperation will all affect the normal use of the edge banding machine, so workers must be on duty Necessary training on its use should be carried out before use. If you want to minimize interruptions during work and affect working hours, please try to use skilled workers to operate it.